Name: AC to DC 19.5v 6.7A 130W Refurbished Power Supply for Lipo Chargers with XT60 Cable Adapter
SKU: 485608

Do you need a DC power supply for your FPV Lipo Charger that uses an XT60 input? Look no further!

With many chargers on the market like the ISDT Q6 Nano / ToolkitRC M6 & M7 requiring an XT60 power input we thought why not make a complete package that includes the required adapter cable ready to use with a 19.5v DC Refurbished Power Supply. These chargers have been tested, have C-Tick/RCM Compliance and will work well for Charging your lipos at a great budget price.

You can calculate your charging amperage by dividing the total wattage by your cell voltage. Some examples are below

4s Battery - 13.5v = flat - 16.8v = charged
130w/13.5 = 9.6a
130w/16.8 = 7.7a

So in this case you would want to charge at a max rate of 9.6 amps if charging 4s batteries.

6s Battery - 20v = flat - 25.2v = charged

130w/20=6.5a
130w/25.2= 5.1

So in this case you would want to charge at a max rate of 6.5 amps if charging 6s batteries.

If you overdraw the wattage on the power supply it will usually reboot your charger or turn off and you will need to power cycle it. You can check the wattage draw on your charger status screen

Please note power supplies may vary slightly in brand and size from time to time due to supply issues.